Send SMS
Contact Us

Karl Fischer Titrator

Karl Fischer Titrator

Karl Fischer Titrator

The Karl Fischer Titrator (Model : µAquaCal10), is ideally used in different industrial manufacturing processes for determining the amount of water. To suffice the water amount determining requirements of our clients, we offer these titrators with dual platinum electrode, moisture trap for reaction vessel, 250ml amber reservoir bottle, Teflon tubing for dispensing path, 250ml reaction vessel, Teflon paddle Teflon assembly, dispensing tube (02 nos) manufacturer test certificate, warranty card and operational and instruction manual.

Model : µAquaCal10

Supplied with 250ml Reaction Vessel, Dual Platinum Electrode, Teflon Paddle Teflon Assembly , Moisture Trap for Reaction Vessel & 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos) , Teflon Tubing for Dispensing Path, Operational & Instruction Manual, Manufacturer Test Certificate and Warranty Card.

Salient Feature Technical Specification

Method of DetectionConductometric
Backlit LCD Display16 x 2 Line Alphanumeric
Range of Moisture Detectionless than 20 PPM to 100%
Display of Reading in ml with minimum resolution0.01ml.
DispenserMotorized Dispensing for low & accurate measurement of reagent.
ElectrodeDual Platinum Electrode
Stirring Time00
End Point Time1-99 Seconds , Users Adjustable
End Point Sensitivity of Moisture DetectionUsers Adjustable
InputElectrode Connector
Power supply230 VAC ± 10% , 50 Hz

Optional
Analysis Report

Report Date & Time12-FEB-2010 – 16:9
Company NameANALAB (VADODARA)
Calibration Date & Time11-FEB-2010 – 23.34
Calibration MethodWater by Volume
Average Titer Factor6.666666
Record Number00
Analysis Date & Time12-FEB-2010 – 16.00
Sample Type & MethodLiquid by Volume
Volume of Sample (ml.))05.000
Density of Sample0.789
Stirring Time (Min:Sec)0
End Point Time (Seconds)20
End Point (ml.)01.21
Moisture %000.2044
Moisture (PPM)0002044.0
H2O (mg/ml)003260.33

Karl Fischer Titrator

Karl Fischer Titrator

AquaCal Karl Fischer Titrator is suitably used in distinguished industries for determining the amount of water available in the raw materials and finished product during the manufacturing process. These titrators are used in pharmaceutical, chemical, petroleum and food processing units.
Model : AquaCal

 

Supplied with 250ml Reaction Vessel, Auto Burette (25 x 0.1ml), 500ml Amber Color Reservoir, Dual Platinum Combined Electrode, Teflon Paddle, Teflon Assembly for holding, Electrode, Moisture Trap, Actuator Assembly, Operational & Instruction Manual and Manufacturer Test Certificate.

Optional

Karl Fischer Titrator

Karl Fischer Titrator

The Karl Fischer Titrator (Model: µAquaCal50) is idyllically utilized in pharmacies, food processing unit, chemical and petrochemical industries for determining the amount of water during any product manufacturing process. These titrators are made by keeping the requirements of our clients in mind and utilizing topmost quality material and sophisticated technologies. This range of titrator determines the quantity of water precisely with the assistance of conductometric detection method.

Model : µAquaCal50
Supplied with 250ml Reaction Vessel, Dual Platinum Electrode, Teflon Paddle Teflon Assembly , Moisture Trap for Reaction Vessel & 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos), Teflon Tubing for Dispensing Path, Operational & Instruction Manual, Manufacturer Test Certificate and Warranty Card.

Salient Feature

Technical Specification
Method of DetectionConductometric
Backlit LCD Display20 x 4 Line Alphanumeric
Range of Moisture Detectionless than 20 PPM to 100%
Display of ReadingDirect Reading of Moisture in PPM, Percentage(%) & mg/ml of water
DispenserMotorized Dispensing for low and accurate measurement of reagent.
ElectrodeDual Platinum Electrode.
Stirring Time00:00 to 99:00 ( Minutes : Second )- Users Adjustable
End Point Time1-99 Seconds , Users Adjustable
End Point Sensitivity of Moisture DetectionUsers Adjustable
Calibration Reminder Alarm0-99 hours
Data StorageMore than 10 Analysis data with corresponding calibration data.
InterfaceParallel Port for Dot-matrix Printer attachment.
InputElectrode Connector
Power supply230 VAC ±10%, 50 Hz

Optional

Analysis Report
Report Date & Time12-FEB-2010 – 16:09
Company NameANALAB (VADODARA)
Calibration Date & Time11-FEB-2010 – 23.34
Calibration MethodWater by Volume
Average Titer Factor6.666666
Analysis Date & Time12-FEB-2010 – 16.00
Sample Type & MethodLiquid by Volume
Volume of Sample (ml.)05.000
Density of Sample0.789
Stirring Time (Min : Sec)00:00
End Point Time (Seconds)20
End Point (ml.)01.41







Karl Fischer Titrator

Karl Fischer Titrator

The Karl Fischer Titrator, is ideally used in different industries for determining the quantity of water while manufacturing processes. These instruments are highly appreciated for their features like high accuracy, quick analysis preparation, small sample quantity required, auto drain facility and high durability. The range is idyllically used in chemical and pharmaceutical industrial manufacturing processes.

Salient Feature
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Karl Fischer Titrator ?

    country-ico

    We will contact you soon !

    Shirish Parmar

    (Director)

    Analab Scientific Instruments Private Limited

    Sayaji Park Society, Vadodara, Gujarat, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us